Main features:
Highest price 8 inch models;
MultiBe used forLarge size square sheet material and small size and multi slice cutting;
More customized power spindle, strong cutting force;
▏Use advanced wizard touch screen manipulationGUIInterface;
▏The intelligent network control system has high reliability and high cutting efficiency.
Multi disc cutting workpiece with graphic function;☑ A variety of complex cutting functions;☑ Image automatic recognition and alignment function;☑ The real-time display and early warning function of the cutting edge.☑ Vacuum early warning function, vacuum pipeline water removal function;☑ Centralized refueling, rapid maintenance function;☑ Cutting, blade database management, operation log record.
Application:
8 inch blue glass, silicon, gallium arsenide, lithium niobate, alumina, ceramics, quartz, sapphire, crystal, PCB platePrecision cutting of such materials; widely used.Optical optoelectronic, communication, triode, IC, LED, NTC, photovoltaic, medical devices, scintillation crystalsAnd other industries.
Fault alarm and low air pressure, hydraulic pressure, servo worktable, servo, spindle drive, altimeter system, control system, operation door safety lock, Water Leakage detection, monitoring, lack of vacuum spindle current protection function.
mostSize of large working objects |
mm |
island 8 "or210mm×210mmsquare |
||
Xaxis
|
Machinable range |
mm |
Two hundred and ten |
|
Feed speed input range |
mm/s |
0.1 - 500 |
||
Yaxis
|
Machinable range |
mm |
Two hundred and ten |
|
Single step intake |
mm |
Zero point zero zero zero one |
||
positioning accuracy |
mm |
Zero point zero zero threewithin/210(single error)Zero point zero zero twowithin/5 |
||
Zaxis
|
Effective travel |
mm |
35(Useø2 "When cutting the blade) |
|
Mobile resolution |
mm |
Zero Point Zero Zero Zero Zero Five |
||
Repetition precision |
mm |
Zero point zero zero one |
||
Maximum cutting blade diameter for use |
mm |
shown 58 |
||
Theta axis |
Maximum angle of rotation |
deg |
Three hundred and twenty |
|
|
Angle accuracy |
″ |
Fifteen(direct drive motor) |
|
principal axis
|
Rated output power |
kW |
1.5 at 30,000 min-1 |
|
Rated torque |
N・m |
Zero point four eight |
||
Rotation number range |
min-1 |
3,000 - 40,000(60,000*) |
||
The maximum framework to be used |
- |
Eightinch |
||
Other Specifications
|
Power Supply |
v |
Three-phaseac380v±Ten% In addition to the above, the transformer needs to be configured |
|
Power consumption |
Processing time |
kW |
Zero point five(reference value) |
|
Warmer time |
kW |
Zero point three(reference value) |
||
Max Power consumption |
kVA |
Three point two |
||
Compressed air supply pressure |
Mpa |
0.5 - 0.8 |
||
Maximum compressed air consumption |
L/min(ANR) |
One hundred and eighty-five |
||
Cutting water pressure |
Mpa |
0.2 - 0.4 |
||
Maximum consumption |
L/min |
Four |
||
Cooling water pressure |
Mpa |
0.2 - 0.4 |
||
Maximum consumption |
L/min |
One point five(in0.3MPaWhen) |
||
Exhaust air volume |
mThree/min |
One point five |
||
Equipment size (W×D×H) |
mm |
Six hundred and twenty×Nine hundred×One thousand and six hundred |
||
Equipment weight |
kg |
aboutSix hundred and thirty |
Conditions of use:
1. please set the machine in a 20~25 C environment (the range of fluctuation is within + 1 c); the indoor humidity is less than 80%, and there is no condensation.
2. please use the air pressure dew point below -15 C, the residual oil is 0.1ppm, the filtration degree is above 0.01um/99.5, clean compressed air.
3., please control the water temperature of the cutting water at room temperature of +2 C (within the range of + 1 c), and the water temperature of the cooling water is the same as that of the room temperature (the fluctuation range is controlled at + 1 degrees Celsius).
4. please avoid the gravity impact of the equipment and any vibration threat from the outside world. In addition, please do not install the equipment near the blower, the vent, the high temperature device and the oil producing device.
5. please install the equipment in a waterproof floor and a place with drainage treatment.
6. please do the operation in strict accordance with the instructions of the company's products.
ChangShu:
TEL:+86-512-5296-9660
PHO:+86-139-1043-2532 Sam Yang
ADD:Changshu Economic & Technological Development Zone
Email:jcxj_support@163.com
Web:http://www.jcxj.com.cn